However, cases arise where your phone might even get bricked. But you need not worry as you can easily unbrick your phone by installing the stock ROM. In this post, we will be telling you how to install AT&T LG G6 Stock ROM. The process is fairly simple, all that you are required to do is fulfil the mentioned pre-requisites, complete some downloads, and then follow this step-by-step guide to safely install US Cellular LG G6 LGUS997 Stock ROM
Advantages of Flashing Stock Firmware on your phone:
You can easily unbrick your phone Unroot the device and gain warranty Re-flash the stock ROM and fix problems
DISCLAIMER
RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide, Proceed at your own risk.
PRE-REQUISITES
Make sure that the USB drivers for your Android device are installed on the PC. Enable USB Debugging On Your Phone.Guide > How to Enable Developer Options, USB Debugging and OEM Unlock On Android Follow the below Guide Exactly or else it may lead to brick your device. RootMyGalaxy.net is not responsible for any damage. We recommend to take complete backup and proceed. Maintain 50-60% battery to prevent sudden shut down between the process.
Download
US Cellular LG G6 (LGUS997) – US99711a_04_0322.kdz
How To Install US Cellular LG G6 LGUS997 Stock ROM / Firmware
Download the latest LGUP and LG USB Drivers and install them on your PC Now download the Stock Firmware from the download section Finally, follow this guide to flash the stock ROM/Firmware (.KDZ) using LGUP tool > How To Flash / Install LG Stock Firmware (ROMs) With LGUP Flash Tool
