Huawei Y7 Pro (2019) was released in January 2019. It is the first mid-range device from Huawei in 2019. It comes equipped with a 6.2 inches display with a water drop notch on the top. The display has a 19:9 screen ratio. The display has a resolution of 720 x 1520 Pixels (~269 ppi density). The screen protection is unknown. The device is powered by Qualcomm SDM450 Snapdragon 450 (14 nm) which is an Octa-core 1.8 GHz Cortex-A53 processor coupled with Adreno 506 GPU. It is coupled with 3 GB of RAM. It comes with 32 GB internal storage option which can be expanded up to 512 GB via microSD.
Steps To Boot Safe Mode On Huawei Y7 Pro (2019)
Power off the phone by holding down the power button for a few seconds. Now Just Press and hold the power button and release it when you see the Huawei on screen. After releasing the Power key, immediately press and hold the Volume down key. Keep holding the Volume key till the phone completely boots up. Once the phone boots up, ‘Safe mode’ should be appeared on the bottom of the screen Done!! Now you can perform any task without any interference of any apps.
Steps To Boot Huawei Y7 Pro (2019) Out of Safe mode
Just Switch Off the device completely and turned it on again. That’s it!! your device should be out of safe mode.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.
