ARK Benefit A3 is an entry-level Android device coming with a 5-inch LCD display with a screen resolution of 1280×720 Pixels. Powering the device is a Quad-core Qualcomm Snapdragon 410 MSM8916 CPU clocked at 1200 MHz coupled with 1 GB of RAM and 8 GB onboard storage which can be expanded up to 32 GB via microSD card. The ARK Benefit A3 sports a single camera setup on the rear side (8 MP with LED dual-tone flash) and a 2 MP front camera setup. The device houses 2100 mAh Lithium-Polymer battery which is Non-Removable. The device has all the important connectivity options as well as the sensors. It comes out of the box with Android 5.0 Lollipop.
Disclaimer
RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach
How To Root ARK Benefit A3 With Magisk Manager
#1 Unlock the bootloader
First, unlock the bootloader of your device, guide: How To Unlock Bootloader Of Any Android Using Fastboot Commands
For more information about Android rooting, check out our detailed post here > What Is Rooting Android Phone? Advantages And Disadvantages
#2 Download stock boot image
Download Stock ROM > Download
Download the boot file according to your device. Once downloaded, unzip the file and open it, look for a .zip file. Open that file too, now you will see a file named boot.img (This is the official stock image or firmware)
#3 Patch boot image
Move the boot.img to your device’s internal storage. Download & install the latest Magisk Manager on your device Open magisk manager, On the main screen, select Install > Install > Patch Boot Image File Now select the boot image (boot.img). Magisk will start to patch the boot image. After completion, the file will be saved as “magisk_patched.img” in your Downloads folder
#4 Finally, Root ARK Benefit A3
Connect your device to PC and transfer the “magisk_patched.img” file from your phone’s download section to the platform-tools folder on your PC
Now issue the following command to boot your device to bootloader mode (Make sure your device is connected to the PC)
Now issue the command given below to Flash the patched boot image
For devices with A/B partition system, use the below commands:
Done !!! Just reboot your device. Your device should be rooted now.
